Morrow Audio PH1 Interconnect...

Problems With Popular Cable Designs...Do your cables possess these?

The Morrow Audio cables differ in 3 major areas from most other popular and often expensive cable designs. As you read about this, you may realize that your cables have problems in these areas. Do not despair, you now qualify for a dramatic improvement in all areas of sound with the Morrow Audio line of cables. After hearing our properly designed cables, many of our customers replaced the ones they had with our complete cable product line.

Take This Test... How do your cables measure up?
Check the boxes that describe your present cable design...

Are you finished checking the boxes? Let's see the result...

1. Cables That Use Stranded Wire:
In stranded wire designs, the strands touch each other hundreds of times at various points along the length of the wire, causing the signal to jump from strand to strand instead of flowing through a continuum. The result is a diode effect (like little mV Diodes) at each point where the strands come into contact, causing distortion of the signal; blurring imaging, soundstage cues, etc.

Another explanation of the diode effect is oxide forming between the strands which encourage a non-linear conduction. At the points where this occurs, actual RF detection can occur, turning your cable into a radio; receiving, detecting and injection RF signal and distortions into your music signal.

In my experience with stranded cable, where each single conductor is made from several strands, not insulated from each other, there imparts an unpleasant harshness and brightness to the sound.

The Morrow Audio Design:
Morrow Audio signal cables use ONLY solid core wire, NEVER stranded. We eliminate all diode effects by using only solid core wire. You will hear much more information in your music that was lost from the smearing effect that stranded wire produces.

Some of our models contain multiple runs of wire. They are mono strands, individually insulated from each other. In the case of our MA2 Reference interconnect, these multiple runs yield a more detailed sound. The speaker cables, out of power handling necessity, also contain these multiple runs of wire.

________________________________________________________

2. Cables That Use Large Gauge Wire:
Different frequencies tend to ride at various depths in the wire structure; the highs, mids and lows tend to separate which cause time and phase errors in the signal. This is commonly known as the "skin effect". When a large gauge wire is used, this problem is even greater, resulting in phase and timing errors. The soundstage is reduced, instrument timbre is distorted. See photo below...

The Morrow Audio Design:
Morrow Audio signal cables ONLY use a small gauge wire. The different frequencies ride at the same plane in the wire, resulting in less phase and timing errors. A more accurate sound is the result. The soundstage is huge, instrument timber is accurate, it seems like the performers are in your room.

___________________________________________________________

3. Cables That Use Mesh Cable Jackets Or Heavy Insulators:
Some cable designs use decorative mesh cable jackets or even heavy insulators to insulate and/or make their cable attractive to the eye.

Inside common cable designs are internal conductors with an extruded insulation of some sort. The insulation material is in close and immediate contact with the conductor along its entire length. One of these conductors might be in the form of a wire mesh that surrounds the center conductor, acting as a shield from RFI.

Wrapped around all this is the outer casing of the cable, made out of rubber, PVC, Teflon or some other material. Finally, there may be a decorative mesh netting around all this, the only purpose of which is to appeal to the eye and make the cable attractive.

These insulation elements all form the dielectric of the wire, which has a tendency to absorb and release energy to and from the conductors. This occurrence produces a negative sonic affect; smearing of the signal and other distortions. The greater the number of insulating layers there are, the greater this distortion will be. The thickness of these layers is also a factor of concern, with thicker layers being the worst.

Have you ever heard of speaker cable lifts? They are little stands that lift the cables off the floor, improving the sound. The improvement comes by keeping the electrical field from reflecting back into the cable off the floor. Why then do cable manufacturers apply decorative mesh, thick insulations and other signal distorting elements in their design?

The Morrow Audio Design:
Morrow Audio cables DO NOT use decorative mesh jackets or heavy insulators. Each strand of wire incorporates a very thin insulation and are bundled together with small pieces of heat shrink every 6 inches. This allows the least amount of reflection back into the cable, retaining the quality of the music you love.

Morrow Audio cables are not as attractive as other designs, but it is the music that counts! With Morrow Audio cables, your music will flow unhindered, resulting in greater realism as well as longer and more enjoyable listening sessions. Those who have have heard our cables describe it as a "Listening Experience".

_____________________________________________________________

Product Description

Pair of solid core, small gauge wire which is 100% shielded with a foil shield. This is then silver soldered to gold plated RCA's.

Cables are the same price up to 1 meter, other lengths and termination upgrades are selectable in the shopping cart found above.

The PH1 has an attractive appearance and possess excellent RFI and noise rejection. The cables are directional depending on first hookup, marking the output end at that time.

Capacitance: 1 nF per meter.

Inductance: .018 mH per meter.

Termination Upgrade Options

Our cables come with high quality RCA terminations that will please the most discriminating listener. For those who desire the absolute best, several Eichmann termination upgrades are available. These are selectable through a drop-down box in the shopping cart after you click the "buy now" icon. The upgrade options include the Eichmann Basis, Eichmann Bullet and the Eichmann Silver Bullet.

The Eichmann Bullet Upgrade

_______________________________________________________________

Breakin Time

We have provided a paper explaining the break-in process and what you will hear.

________________________________________________________________

Time For Orders

Cables are hand made by Mike Morrow himself. Our cables are very popular and we receive many orders. At any given moment, we have 6 or more orders being worked on. All orders are worked on and completed in the order in which they were received. You can view a real time estimate time for completion by clicking here.

_______________________________________________________________

Have A Question Or Comment? Please use the convenient form below.
You will receive a reply in your email shortly. You may also call 800-280-9167.

FREE NEWSLETTER! "Each month I share great ways to improve the sound of your audio system. Sign-Up today!"

Jump To Top